Your All-in-One Pre-Construction Partner
Pre-Construction Engineering Solutions
Discover Our Services
New Jersey, USA
What We Assure
97% Bid Win Rate
Higher accuracy means winning more bids
Fast Turnaround
Precise estimates when you need them, without delay
Certified & Trusted
Services backed by certified professionals
Competitive Pricing
Premium accuracy at cost-effective rates
Our Services
We Provide Full-Spectrum Pre-Construction Solution
Architecture, Planning & BIM
Architecture, Planning & BIM
Delivering complete architectural plan sets and permit-ready drawings with advanced 2D/3D and 4D/5D BIM modeling for precise clash detection, smooth collaboration, and optimized residential and commercial project execution.
Design & Engineering
Design & Engineering
Offering specialized structural engineering with thorough analysis, expert steel detailing, precise shop drawings, and fully integrated MEP design for guaranteed project integrity.
Cost Estimation & Quantity Takeoffs
Cost Estimation & Quantity Takeoffs
Delivering specialized cost analysis and quality assurance using RSMeans data, precise labor and material pricing, and full compliance with Prevailing Wages and the Davis-Bacon Act for both union and non-union rates.
Project Management & Scheduling
Project Management & Scheduling
Offering strategic pre-construction coordination with Primavera, Oracle, and MS Project for CPM scheduling, bid management, and targeted value engineering.
PE Licensed Sign/Stamp
PE Licensed Sign/Stamp
Ensuring full ADA, NFPA, and state/local code compliance through professional document review and PE-stamped certification for smooth permit approval.
Bid Management & Proposal Analysis
Bid Management & Proposal Analysis
Delivering strategic bid management and proposal analysis to ensure optimized, requirement-aligned submissions that maximize your bid win rate.
View Full Spectrum
- Residential, Commercial & Industrial Architecture Design
- Interior Architecture & Space Planning
- Site Planning, Feasibility & Master Planning
- Conceptual, Schematic & Design Development Packages
- Construction Document (CD) Sets
- Existing Condition & As-Built Surveys
- Building Code & Zoning Analysis
- ADA & Accessibility Compliance Design
- Exterior Façade & Material/Finish Consultation
- Sustainable Design & LEED Consulting
- Architectural Peer Review
- Renovation & Retrofit Design Support
- Design Phase Cost & Value Engineering Review
- Project Coordination with Stakeholders
- Permit-Ready Documentation
- 2D/3D Architectural Modeling & Drafting
- Photorealistic Rendering (Interior & Exterior)
- Virtual Reality (VR) & Animated Walkthroughs
- Digital Fabrication & Virtual Mockups
- Revit, SketchUp & Rhino Modeling Services
- Topographical, Landscaping & Site Modeling
- Material Texture & Lighting Simulation
- Digital Design Coordination
- Construction Sequencing & Tolerance Modeling
- Design Intent & Fabrication Support
- Trade Subcontractor Model Integration
- Model-Based Constructability Review
- BIM Data Extraction & Reporting
- As-Built BIM Models
- BIM Execution Plan (BEP) Development
- BIM Coordination & Clash Detection
- Level of Development (LOD) 100–500 Modeling
- Model-Based Quantity Takeoff (QTO)
- 4D Scheduling & 5D Cost Management
- 6D Facilities Management Integration
- BIM-Based Estimating & Cost Analysis
- Construction & Fabrication Modeling
- Structural Feasibility & Load Analysis
- Foundation & Framing Design (Steel, Concrete, Wood, Masonry)
- Structural Detailing & Shop Drawings
- Lateral Force & Seismic/Wind Load Calculations
- Structural Connections & Peer Review
- Value Engineering & Retrofit Analysis
- Design Compliance & Constructability Review
- Renovation/Retrofit Structural Support
- Advanced Analysis & Modeling Support
- Construction Document Coordination
- Quality Assurance of Structural Design
- Tolerance & Safety Analysis
- Engineering Certification Support
- HVAC, Plumbing, Electrical & Fire Protection Design
- HVAC Load Calculations & Mechanical Pre-Design
- Ductwork, Piping, Power Distribution & Lighting Design
- Plumbing System, Sanitary & Storm Drainage Design
- Fire Protection Planning
- Low-Voltage & Special Systems Design (Medical Gas, Renewable Energy)
- Utility Connection & Energy Modeling
- Heating/Cooling Zoning Plans
- MEP Coordination & Clash Detection
- Electrical Load Analysis & One-Line Diagrams
- Mechanical/Plumbing Demand Analysis & Riser Diagrams
- Commissioning & Systems Testing Support
- Design & Construction Document Review
- Renovation/Retrofit MEP Support
- Life Cycle & Performance Analysis
- Project Integration with Structural & Architectural Design
- Coordination of Construction & Shop Drawings
- QA/QC of MEP Design Documentation
- As-Built MEP Documentation
- Advanced MEP Simulation & Modeling
- Energy Efficiency & Compliance Verification
- Sitework, Earthwork & Utilities Estimation
- Concrete, Rebar, Masonry & Structural Steel Estimation
- Wood Framing & Lumber Takeoff
- Drywall, Ceilings & Finishes Estimation
- Roofing & Waterproofing Estimation
- Doors, Windows & Openings Estimation
- Painting & Specialty Coatings Estimation
- Plumbing, Mechanical & HVAC Estimation
- Electrical System Estimation
- Specialty Equipment & Medical Gas Estimation
- Demolition, Remediation & Renovation Estimation
- Steel Decking & Joist Estimation
- Roofing & Waterproofing Estimation
- Site Utilities & Storm Drainage Estimation
- FF&E & Material Takeoff Estimation
- Landscape & Exterior Works Estimation
- Acoustic & Ceiling Systems Estimation
- Civil & Earthworks Estimation
- Value Engineering Cost Estimation
- Cost Analysis & Reporting
- Labor, Equipment & Material Cost Estimating
- RS Means Database & Market Pricing Application
- Prevailing Wages & Davis-Bacon Compliance
- Union & Non-Union Labor Rate Calculation
- Conceptual, Design Phase & Final Bid Estimating
- Budget Planning & Cost Modeling
- Change Order & Renovation Cost Estimation
- Life Cycle Cost Analysis (LCCA)
- Contractor Overhead & Profit Analysis
- QA Review of Estimating Data
- Benchmarking & Value Engineering Cost Analysis
- Digital Cost Data Integration
- Financial Reporting & Documentation
- Project Cost Tracking & Updates
- Pre-Construction Planning & Project Charter Development
- Scope of Work (SOW) & Work Breakdown Structure (WBS)
- CPM, Primavera & MS Project Scheduling
- Schedule Updates, Risk Analysis & Resource Loading
- Time-Impact Analysis & Baseline Management
- Design-Build & Construction Phasing Strategies
- Site Logistics & Long-Lead Item Planning
- Project Risk Assessment & Mitigation
- Constructability & Document Review
- Pre-Construction Kick-Off Meetings
- Cost Control System Setup
- Stakeholder Communication Plans
- Resource Allocation Optimization
- Project Closeout Planning
- Procurement & Subcontractor Coordination
- Bid & Proposal Coordination Support
- Project Documentation & Reporting
- Schedule Optimization & Monitoring
- Integrated Project Delivery Support
- Design Coordination & QA/QC
- Vendor/Contractor Liaison & Oversight
- Project Workflow & Timeline Management
- Value Engineering Implementation
- Project Benchmarking & Lessons Learned
- Overall Project Execution Optimization
- PE Licensed Stamping (Structural)
- PE Licensed Stamping (Civil)
- PE Licensed Stamping (Mechanical)
- PE Licensed Stamping (Electrical)
- PE Licensed Stamping (Plumbing)
- Design Compliance Review
- ADA Compliance Document Review
- NFPA Fire Safety Compliance Review
- All State Compliance Certification
- Local Building Code Compliance Review
- Zoning and Planning Compliance Review
- Architectural Peer Review (for Engineering Compliance)
- Construction Material Submittal Review
- Special Inspections Program Support
- Engineering Letter of Certification
- Strategic Bid Management
- Proposal Analysis and Review
- Bid Platform Management
- Subcontractor Bid Management
- Bid Package Creation and Assembly
- Scope Gap Analysis
- Bid Leveling and Comparison
- Contract Preparation Support
- Bid Submission Administration
- Final Pricing Recommendation
- Pre-Award Negotiation Support
- Residential, Commercial & Industrial Architecture Design
- Interior Architecture & Space Planning
- Site Planning, Feasibility & Master Planning
- Conceptual, Schematic & Design Development Packages
- Construction Document (CD) Sets
- Existing Condition & As-Built Surveys
- Building Code & Zoning Analysis
- ADA & Accessibility Compliance Design
- Exterior Façade & Material/Finish Consultation
- Sustainable Design & LEED Consulting
- Architectural Peer Review
- Renovation & Retrofit Design Support
- Design Phase Cost & Value Engineering Review
- Project Coordination with Stakeholders
- Permit-Ready Documentation
- 2D/3D Architectural Modeling & Drafting
- Photorealistic Rendering (Interior & Exterior)
- Virtual Reality (VR) & Animated Walkthroughs
- Digital Fabrication & Virtual Mockups
- Revit, SketchUp & Rhino Modeling Services
- Topographical, Landscaping & Site Modeling
- Material Texture & Lighting Simulation
- Digital Design Coordination
- Construction Sequencing & Tolerance Modeling
- Design Intent & Fabrication Support
- Trade Subcontractor Model Integration
- Model-Based Constructability Review
- BIM Data Extraction & Reporting
- As-Built BIM Models
- BIM Execution Plan (BEP) Development
- BIM Coordination & Clash Detection
- Level of Development (LOD) 100–500 Modeling
- Model-Based Quantity Takeoff (QTO)
- 4D Scheduling & 5D Cost Management
- 6D Facilities Management Integration
- BIM-Based Estimating & Cost Analysis
- Construction & Fabrication Modeling
- Structural Feasibility & Load Analysis
- Foundation & Framing Design (Steel, Concrete, Wood, Masonry)
- Structural Detailing & Shop Drawings
- Lateral Force & Seismic/Wind Load Calculations
- Structural Connections & Peer Review
- Value Engineering & Retrofit Analysis
- Design Compliance & Constructability Review
- Renovation/Retrofit Structural Support
- Advanced Analysis & Modeling Support
- Construction Document Coordination
- Quality Assurance of Structural Design
- Tolerance & Safety Analysis
- Engineering Certification Support
- HVAC, Plumbing, Electrical & Fire Protection Design
- HVAC Load Calculations & Mechanical Pre-Design
- Ductwork, Piping, Power Distribution & Lighting Design
- Plumbing System, Sanitary & Storm Drainage Design
- Fire Protection Planning
- Low-Voltage & Special Systems Design (Medical Gas, Renewable Energy)
- Utility Connection & Energy Modeling
- Heating/Cooling Zoning Plans
- MEP Coordination & Clash Detection
- Electrical Load Analysis & One-Line Diagrams
- Mechanical/Plumbing Demand Analysis & Riser Diagrams
- Commissioning & Systems Testing Support
- Design & Construction Document Review
- Renovation/Retrofit MEP Support
- Life Cycle & Performance Analysis
- Project Integration with Structural & Architectural Design
- Coordination of Construction & Shop Drawings
- QA/QC of MEP Design Documentation
- As-Built MEP Documentation
- Advanced MEP Simulation & Modeling
- Energy Efficiency & Compliance Verification
- Sitework, Earthwork & Utilities Estimation
- Concrete, Rebar, Masonry & Structural Steel Estimation
- Wood Framing & Lumber Takeoff
- Drywall, Ceilings & Finishes Estimation
- Roofing & Waterproofing Estimation
- Doors, Windows & Openings Estimation
- Painting & Specialty Coatings Estimation
- Plumbing, Mechanical & HVAC Estimation
- Electrical System Estimation
- Specialty Equipment & Medical Gas Estimation
- Demolition, Remediation & Renovation Estimation
- Steel Decking & Joist Estimation
- Roofing & Waterproofing Estimation
- Site Utilities & Storm Drainage Estimation
- FF&E & Material Takeoff Estimation
- Landscape & Exterior Works Estimation
- Acoustic & Ceiling Systems Estimation
- Civil & Earthworks Estimation
- Value Engineering Cost Estimation
- Cost Analysis & Reporting
- Labor, Equipment & Material Cost Estimating
- RS Means Database & Market Pricing Application
- Prevailing Wages & Davis-Bacon Compliance
- Union & Non-Union Labor Rate Calculation
- Conceptual, Design Phase & Final Bid Estimating
- Budget Planning & Cost Modeling
- Change Order & Renovation Cost Estimation
- Life Cycle Cost Analysis (LCCA)
- Contractor Overhead & Profit Analysis
- QA Review of Estimating Data
- Benchmarking & Value Engineering Cost Analysis
- Digital Cost Data Integration
- Financial Reporting & Documentation
- Project Cost Tracking & Updates
- Pre-Construction Planning & Project Charter Development
- Scope of Work (SOW) & Work Breakdown Structure (WBS)
- CPM, Primavera & MS Project Scheduling
- Schedule Updates, Risk Analysis & Resource Loading
- Time-Impact Analysis & Baseline Management
- Design-Build & Construction Phasing Strategies
- Site Logistics & Long-Lead Item Planning
- Project Risk Assessment & Mitigation
- Constructability & Document Review
- Pre-Construction Kick-Off Meetings
- Cost Control System Setup
- Stakeholder Communication Plans
- Resource Allocation Optimization
- Project Closeout Planning
- Procurement & Subcontractor Coordination
- Bid & Proposal Coordination Support
- Project Documentation & Reporting
- Schedule Optimization & Monitoring
- Integrated Project Delivery Support
- Design Coordination & QA/QC
- Vendor/Contractor Liaison & Oversight
- Project Workflow & Timeline Management
- Value Engineering Implementation
- Project Benchmarking & Lessons Learned
- Overall Project Execution Optimization
- PE Licensed Stamping (Structural)
- PE Licensed Stamping (Civil)
- PE Licensed Stamping (Mechanical)
- PE Licensed Stamping (Electrical)
- PE Licensed Stamping (Plumbing)
- Design Compliance Review
- ADA Compliance Document Review
- NFPA Fire Safety Compliance Review
- All State Compliance Certification
- Local Building Code Compliance Review
- Zoning and Planning Compliance Review
- Architectural Peer Review (for Engineering Compliance)
- Construction Material Submittal Review
- Special Inspections Program Support
- Engineering Letter of Certification
- Strategic Bid Management
- Proposal Analysis and Review
- Bid Platform Management
- Subcontractor Bid Management
- Bid Package Creation and Assembly
- Scope Gap Analysis
- Bid Leveling and Comparison
- Contract Preparation Support
- Bid Submission Administration
- Final Pricing Recommendation
- Pre-Award Negotiation Support
Meet the Structure Values Leadership Team
Here’s How The Process Goes
Initial Contact
You reach out to us via our online form or direct call, sharing your project scope, goals, and uploading any preliminary plans or specifications.
Scope Review
Our Business Manager reviews your project documents and contacts you to clarify needs. We then generate a detailed service proposal outlining the exact scope, deliverables, and Fast Turnaround timeline.
Kick-Off
Upon approval, we immediately assign the specialists and initiate the project kick-off, ensuring that all team members use the latest software and zip-code-based pricing data.
Delivery & Support
You receive the project submission. Our Business Manager remains your point of contact for any post-delivery review or project-related query.
Client’s Reviews
Alice HowardEngineering Manager
I hired your company for a major construction project, and I am extremely satisfied. Your team displayed excellent craftsmanship and attention to detail.
Nathan LiInterior Designer
Your attention to detail and timely response made the entire process seamless. Thank you for your exceptional service!
Ema RomeroArchitect Manager
From the initial design phase to the final touches, everything was handled with utmost care and precision. I am thrilled with the outcome and would gladly recommend your services.
John LewisProject Manager
I am delighted with the final product and will definitely engage your services for future projects. You guys are indeed the best construction estimating service provider in the USA.
Our Proud Partners
Frequently Asked Questions
What is Pre-Construction Engineering, and why is it essential for my project?
Pre-Construction Engineering is the critical planning phase before site work begins. It involves integrating specialized services like structural analysis, MEP design, architectural compliance, and cost estimation. This ensures that the project design is feasible, fully coordinated (clash detection), and accurately budgeted, minimizing risk, expensive change orders, and delays during construction.
How does Structure Values guarantee the accuracy of its cost estimates?
We achieve high accuracy through a multi-layered approach: utilizing certified estimators, proprietary zip-code-based pricing, and industry-leading data sources like the RS Means Database. Crucially, we perform detailed, CSI Division-based takeoffs and adhere to strict Quality Assurance protocols before delivering the final estimate.
What is the difference between 3D, 4D, and 5D BIM services?
3D BIM is the intelligent geometric model. 4D BIM integrates time, linking the 3D model with CPM scheduling data (e.g., using Primavera or MS Project) to visualize the construction sequence. 5D BIM integrates cost, linking quantities from the model directly to estimation data for real-time cost analysis and budgeting.
Can you handle projects that require compliance with the Davis-Bacon Act and Prevailing Wages?
Yes. Our Cost Estimation services specialize in federal and public projects. We accurately calculate Labor and Material Pricing to ensure full compliance with the Davis-Bacon Act and correctly apply Union and Non-Union Prevailing Wages for labor, mitigating potential legal and financial risks for our clients.
Does Structure Values provide the necessary PE Licensed Sign/Stamp for permits?
Absolutely. We provide a guaranteed PE Licensed Sign/Stamp (Professional Engineer) for structural, civil, and MEP documents across all states. This service ensures your drawings meet All State Compliance, ADA compliance, and NFPA standards, significantly accelerating the permit approval process
What is the typical turnaround time for a complete material takeoff?
Our commitment to Fast Turnaround is a core value. While project complexity varies, we typically deliver comprehensive material takeoffs and preliminary cost analysis reports within 48 to 72 hours of receiving the necessary plans and scope documentation.
How does Value Engineering (VE) benefit my project budget?
Value Engineering is a strategic analysis performed during the planning phase. We review design components and material choices to identify alternative solutions that reduce the overall project cost without compromising critical function, quality, or scope. It ensures maximum return on investment.
Who do you typically work with—General Contractors, Architects, or Developers?
We serve the entire pre-construction ecosystem. We partner with General Contractors to boost their Bid Win Rate, Developers for financial feasibility and planning, and Architects and Engineering firms needing specialized Structural Engineering, MEP design, and PE stamping support.
What specialized software do you use for project scheduling and coordination?
For advanced Project Management & Scheduling, we utilize the industry’s most robust tools, including Primavera P6, Oracle, and MS Project, enabling sophisticated CPM scheduling and resource allocation. This integration provides clients with precise project timelines and risk analysis.